1

Introduction to MSP430 Kit and Programming Environment with program to work with ports

MSP430-100

2

Configure timer block with capture/compare channel 0 & 1 to generate 4.096 KHz & 1.024  KHz signal. 

3

Configure watchdog timer in watchdog & interval mode.

4

Test various Power Down modes in MSP430.

5

Read Temperature of MSP430 with the help of ADC.

6

Use Timer to trigger ADC for reading analog signal in most efficient manner to reduce power consumption.

7

Configure DAC to generate positive ramp signal.

8

Use Comparator to compare the signal threshold level.

9

Implement Hardware Multiplier to multiply two arrays to perform MAC operation.

10

Implement DMA controller for basic convolution algorithm.

11

Use I2C protocol for communication between more than two MSP430 connected on I2C bus.

12

Use SPI protocol for communication between two MSP430.